§ 23.38.010. Placement and design of manufactured homes.

The purpose of this section is to provide community-wide standards for manufactured homes that assures that the manufactured homes will be of similar nature to existing homes.

(1)

The manufactured home shall be placed on a lot that is owned by the owner of the manufactured home.

(2)

The manufactured home must be newly constructed and previously unoccupied.

(3)

The manufactured home must be taxed as real estate.

(4)

The manufactured home shall contain at least seven hundred square feet of floor area.

(5)

The manufactured home must be at least twenty-four feet wide.

(6)

The exterior of the manufactured home shall be placed on a permanent foundation that meets the requirements set forth in the most current edition of the ICC Residential Building Code adopted by local resolution.

(7)

The exterior wall covering is required to be either:

(a)

Wood or masonry finish, or material that appears to be wood or masonry; and/or

(b)

Vertically or horizontally grooved siding or lap siding, or material that appears to be vertically or horizontally grooved siding or lap siding.

(8)

The manufactured home shall have a pitched roof.

(9)

The roofing material of the manufactured home shall consist of either wood shakes, asphalt, composition, or wood shingles; clay, concrete, slate or metal tiles.

(10)

Use of flat or corrugated sheet metal for the exterior walls or roof covering is prohibited.

(Ord. 1888 (part), 2000: Ord. 1602, 1990).

(Ord. No. 2058, 3-16-2009)